BERKELY WOOD BLINDS

Berkely Wood Blinds

• Our blinds are crafted from high-quality American Basswood sourced from responsibly managed forests.
• As a vertically integrated company, we control the entire process—from raw lumber to the finished, custom-made blinds.
• We maintain near-zero backorders due to our independence from Asian imports.
• Slat widths: Our wood blinds are available in multiple sizes, including 1 3/8″, 2″, and 2 1/2″.
• We are the only company offering a narrow slat cordless blind as an alternative to the traditional 1″ wood blinds.
• Every slat size is available with all color options and custom features.
• With the widest color range in the industry, we offer both Standard and Premium color categories.
• We efficiently handle commercial projects of any scale and color specifications in a short time frame.
• All blinds can be customized with Cloth Tapes and are compatible with various operating modes.
• Operating Modes include Cordless Lift, Wood Wand Tilt, and Motorized operation.
• Our motorized blinds feature Tilt & Lift functions, powered by a rechargeable battery for convenience.
• We manufacture cordless blinds up to 96” in height and motorized blinds up to 120” in height.
• For multiple blinds in one window, we offer a unified segmented valance for a seamless look.
• Cut-outs are available to accommodate unique window designs.
• Color coordination extends to brackets and headrails for a polished finish.
• All wood components are expertly color-matched to the slat color for a cohesive appearance.

Cloth Tapes add both a decorative element and light dimming to the wood blind
They help to block light by covering the route holes when the slats are closed
Tapes are secured on bottom rail by furniture quality nail heads
Decorative tapes are glued to the front of 1″ wide cloth tapes only.
Glued Decorative tapes will have a coordinating solid twill color on the back
Minimum blind width for Cloth Tapes is 13″ (with Motorized Tilt&Lift is 30″)
Upcharge Cost Applicable

(*1) Blinds wider than 72″ must be ordered as two blinds with one Valance or Multiple Blinds with one Valance
(*2) Blinds taller than 96″, can only be lifted 96″. There will be an opening at the top.
• There is a 1/4″ tolerance on the overall height of the blind and 1/8″ on the overall width.
• Blinds less than 18″ wide can only be made up to 96″ long.

Blinds from 9″ to 15″ wide are considered undersize
Height can be up to 72″
Center wand tilt only. No lift operation
Available with standard ladders only
Upcharge Cost Applicable

Mounting Dimensions For All Controls

* If a spacer block is requested for any blind, except 2 1/2″, then you need to add 3/8″ to the measurement to account for the spacer block.
** 2 1/2″ slat blinds come with spacer blocks and these have been already accounted in the measurements above.
Note: There is a 1/8″ tolerance on measurements above.

Headrail Deductions

Headrail Dimensions

GENERAL OVERVIEW

•Our motors allow Tilt and Lift operations
•A rechargeable battery is installed inside the Headrail
•The battery can be recharged with an optional AC/DC converter or a Solar Cell charger.
•Blinds are operated with a Remote-Control unit
•The Remote Control (RC) can operate from 1 up to 15 blinds
•The Motor and RC units are pre-programmed at the factory.
•Customer doesn’t need to program anything
•The Tilt & Lift motor is installed in a High-Profile headrail

•Installed in the middle of the High-Profile headrail
•Connects to the battery pack with a cable (included)
•Has an antenna to receive the Radio Frequency signal from the remote
•The headrail has a bottom opening near the Left or Right end to connect the CHARGER
•The default is the Right end.

BATTERY

The Charger requires a standard power outlet. It comes with a 16 ft long white cable to connect to the Charger Port.

SOLAR PANEL

The battery can also be charged with a Solar Panel (Optional).
The Solar Panel can be connected to the Rechargeable Battery through the Charger Port or, to hide the cable, the auxiliary Solar Panel Port facing the Bracket.

•Communicates to motor(s) via Radio Frequency
•Comes with a holder which can be mounted to the wall
•Remotes and holders are white in color
•Every Motor is paired to one Remote
•Our RC can control up to 15 motors, each motor can have different settings
•In Channel 0, all motors will operate simultaneously
•At time of order, customer must specify which channels are assigned to each blind or group of blinds
•Each blind has a sticker showing the Channel number it was pre-programmed
•If the Remotes gets lost or becomes inoperable, a replacement must be ordered.
•A new RC must be paired with each motor. The corresponding instructions to do it, will arrive with the new RC
•Requires a battery # CR2450 to operate (included). Replacing the battery doesn’t erase the programming