BERKELY DUAL SHEER SHADES

Dual Sheer Shades are decorative in nature and are made using polyester materials. The fabrics in this collection
should not be treated with harsh chemicals.
When dusting is required, use something gentle. We recommend a vacuum brush or lightly dusting by hand.
Light steaming may be used in the event of wrinkles. Please be sure to avoid contact with the fabric and hold the
steamer at least 6” away.
If spot cleaning is required, use only water or a very mild detergent. Cleaning the shade in its entirety can cause it to shrink, leave water spots, or alter the color of the fabric

Open the fabric bands to allow light into the room.
Close the bands for privacy or to reduce glare.
Raise the shade to allow full light and enjoy the view.

Because of their construction and fabric, Dual Sheer Shades may show waviness when not properly installed.  It is important to ensure shades will be installed to a level mounting surface or that shims are used to level the brackets.  All provided brackets must be installed and evenly spaced.  This is especially important for shades wider than 95”.

Dual Sheer Shades operate by aligning the fabric bands in the open position for light and view-through, or close the bands for privacy and shade. Fully raise the shade to allow full light and enjoy the view.
Fabrics include 79 light-filtering and 34 room-darkening options.
Shades come standard with clutch control or can be paired with our unbeatable wand and remote control motorization options.
All dual sheer shades come standard with a 3″ cassette that is available with a rounded or square profile.
Shades are available in wide widths with fabrics up to 108″ or 110″ wide.
Find the perfect band for your view-through preferences with band heights ranging from 3″ – 4¾”
Shades come standard with clutch control. Choose cordless control or our unbeatable wand and remote control motorization options for cord-free lift. All dual sheer shades come standard with a 3″ cassette that is available with a rounded or square profile. Add a fabric wrapped bottom bar for the perfect finishing touch.

Standard control is clutch with plastic beaded chain in 5 colors: white, beige, gray, bronze, and black. Cords are color coordinated to match cassette color.
Clutches and loop tensioners are always clear.
Cord loops come in standard sizes. The size closest to ¾ length of shade is standard. A different size may be selected for no additional charge.
Custom length metal bead chain is available as a surcharge option.
Compliant cord tensioners are provided with clutch control shades. Cord tensioners secure the cord loop to the wall or window. They must be installed for the shade to be compliant with safety regulations and to operate properly.

Cordless shades can be set to an exact position by raising or lowering the bottom bar.
All cordless shades will include a handle, which can be pulled when lowering the shade.
Fabrics noted with * on the Materials Table are not available to order with cordless control.
Cordless bottom bar can be fabric wrapped for a surcharge.
Lift Assist pole is available to help raise and lower cordless shades. Pole telescopes to 53”.
Note: Cordless shades use a different bottom bar than available for clutch or motorized shades.