BERKELY WOVEN WOOD SHADES

When selecting woven wood shades, always hold pattern samples up to the window to see how much light they let in and how the pattern changes with direct light coming through. Many woven wood patterns are very open and do not offer much privacy without a liner. If privacy is needed, choose between attached or operable liners.
Edge bindings are available for all patterns. Edge bindings offer a decorative accent of color and help protect the edges of delicate patterns.

The Materials Reference table provides useful technical information about each pattern and also identifies which price chart you should use. Coordinated edge binding, liner, and wand colors are also listed for each pattern.
The fabrics in this collection are made from natural materials, which are subject to variation in color, texture, and weave.
Like any natural product, fabrics may show natural color changes over time.
Woven wood fabrics are not ideal for rooms with excessive humidity like bathrooms.  Shades installed in these environments may bow or twist over time.

Material is attached to the back of the head rail. Shade includes a 6” valance to conceal the components. When raised, the material rises from the bottom in flat folds.

Material is attached to the front of the head rail, without a valance. When
raised, the material rises from the bottom in flat folds. Optional back
valance is available upon request.
Clutch shades will have the cord loop behind of the shade.

Edge binding is available for all patterns.
Edge binding is applied to the sides of both the shade and valance. It is not applied to the bottom of either.
Edge bindings are available in 10 colors and will show ½” on the face of the shade.
Some patterns are required to be ordered with edge binding, as noted in the Materials
Reference table. Patterns that require edge binding will have the warranty for frayed edges voided if ordered without edge binding.

Outside mount shades are recommended to be ordered with valance returns.
Returns for both outside and inside mount shades are available free of charge if
requested at the time the order is placed.
Standard valance returns are made using the shade material. Valance returns can
also be made using edge binding fabric for a surcharge.
Standard valance return height will be 1½” less than the valance height. This length
will keep the rolled bottom of the valance from interfering with the return.
Optional short valance returns are also available. Short returns cover the end of the
head rail and hide the shade components, keeping the stack of the raised shade
away from the returns.
Custom valance return lengths are available to be ordered upon request.
All valance returns will be made with an L-shaped connector to attach to the back
of the valance. This holds the returns in place and creates a clean, finished corner.

Wand control motorized shades are powered by an internal, rechargeable lithium-ion battery. The motor is controlled using a wand, which hangs to the side of the shade.
Waterfall shades cannot be ordered with wand controls. Wands come in four lengths: 24″, 36″, 48″, and 60″.
Available colors include: white, beige, gray, bronze, and black.  Wand control shade motor batteries are recharged via a standard micro-USB power  adaptor which plugs into the end of the wand.
Motorized shades will be mounted on a deeper head rail (see Specifications for details).
All wand control shades will be made with the shade fabric on the control side 5/8”
narrower for shades without returns and 7/8” narrower for shades with returns than the ordered width, allowing the wand to hang to the side of the shade. This may cause a light gap on the control side of inside mount shades with black-out liner.

Connects through 2.4 GHz wifi or directly to router with ethernet cable.
Works with Connector+ App, Amazon Alexa, Control4, Google Home,
IFTTT, RTI, Samsung Smart Things, and Siri Short Cuts.

Shades with movable liners (or twin shades) are shades with a separate, operable liner and two sets of controls: one for the woven wood shade in front and one for the liner shade behind. Controls can be on the same side or on opposite sides of the shade.
Controls can also be a mix of cordless controls, clutches, and motorization (wand or remote). Cord loops on the clutch control for the liner shade will always be positioned behind the front shade.
Outside mount twin shades will be made with a valance that is ¾” wider than the ordered shade width. This will allow the returns to fit behind the valance.
Twin shades have deeper head rails to accommodate the dual sets of controls (see Specifications for details).
Twin Shades are not available as 3-on-1 head rail.

Back valances for waterfall shades are available upon request and can be ordered in either the shade fabric or the liner fabric for lined shades. Back valances conceal the shade components from the back of the shade.
Interior valances come standard with waterfall shades that are unlined or that are ordered with a light-filtering liner. Interior valances block the outline of the shade components from showing on the front of the shade. Valances are 4” long and are made with black-out White  (W4-D) liner material. Because the valance is made with black-out fabric, the part of the shade in front of the interior valance will look darker than the rest of the shade when light is coming through.